OUR PRODUCTS
Adhesives for Corrugated industry
Trade Name: Corrugel (Modified Starch)
Corrugel (Modified Starch) is a fine, dry & off white cream color powder. It is made out of best quality starch
especially treated and formulated with different additives. It forms a solution when mixed with
water. It increases the dry strength as measured by PAT (Pin adhesion test), ECT (Edge Crush Test)
and BCT (Box Crush Test). Our products are suitable for both manual and automated plants.
SPECIFICATIONS:
| APPEARANCE | OFF WHITE POWDER |
| VISCOSITY 2% | 100 – 225 CPS |
| PH 2% | 9-11 |
| MOISTURE | 12% MAX |
| ASH % | 0.03-0.13 |
| SIEVE | 18 mesh 100% PASS |
Carboxy Methyl Cellulose & Carboxy Methyl Starch
Trade Name: Acamyl
Acamyl is an odorless, tasteless and nontoxic powder soluble in both hot and cold water. The
product acts as an anti-soil re-deposition agent when it is used in powder detergent formulations.
It has been accepted by many detergent manufactures around the globe.
SPECIFICATIONS:
| APPEARANCE | OFF WHITE POWDER |
| ACTIVE CONTENT | 70.0 % Min |
| DEGREE OF SUBSTITUTION | 0.4 Min |
| BULK DENSITY | 400-800 kg/m3 |
| VISCOSITY 2% | 15 - 50 CPS |
| PH 2% | 9-11 |
| MOISTURE | 12% MAX |
| ASH % | 1 MAX |
| SIEVE | 18 mesh 100% PASS |
Sizing Chemicals for Textile Industry.
Trade Name: Carbocel YSP/ Carbocel S
The primary object of sizing a fibrous yarn is to enable it to be woven efficiently. To achieve this
objective, surface fibers on one yarn must be prevented from becoming entangled with those on
adjacent yarns as they move past one another with the action of the heads and reeds in weaving.
Specifications - Carbocel YSP
| BASE RAW MATERIAL | OFF WHITE POWDER |
| ACTIVE CONTENT | TAPIOCA/CORN STARCH |
| APPEARANCE | CREAMISH WHITE POWDER |
| VISCOSITY 2% @95 ºC | 10 – 20 CPS |
| PH 2% | 1.9.5 |
| SOLUBILITY | 98% -100% (HOT WATER) |
| MOISTURE | 12% MAX |
| ASH % | 1 MAX |
| SIEVE | 18 mesh 100% PASS |
Specifications - Carbocel S
| BASE RAW MATERIAL | TAPIOCA/CORN STARCH |
| APPEARANCE | WHITE POWDER |
| APPEARANCE | CREAMISH WHITE POWDER |
| VISCOSITY 2% @95 ºC | 10 – 20 CPS |
| PH 2% | 7 – 8 |
| SOLUBILITY | 98% -100% (HOT WATER) |
| MOISTURE | 12% MAX |
| ASH % | 1 MAX |
| SIEVE | 18 mesh 100% PASS |
| CARBONYL | 0.06% |
| CARBOXYL | 0.1% |
Oxidized Starch for paper industry
Trade Name: Corrusize
It is an ultra-low viscosity starch for paper sizing. It produces better film & gives great results
during surface sizing on Sizing press. Oxidized Starch improved the paper appearance, printing
character and improved sheet “rattle” and “feel”. It is better to use over other chemicals
especially in Craft Paper making.
SPECIFICATIONS:
| BASE RAW MATERIAL | TAPIOCA/CORN STARCH |
| APPEARANCE | WHITE POWDER |
| DEGREE OF SUBSTITUTION | 0.4 Min |
| VISCOSITY 10% @95 ºC | MAX 50 CPS |
| PH 2% | 7 – 8 |
| SOLUBILITY | 98% -100% (HOT WATER) |
| MOISTURE | 12% MAX |
| ASH % | 1 MAX |
| SIEVE | 18 mesh 100% PASS |
| CARBONYL | 0.06% |
| CARBOXYL | 0.1% |
Dextrins
Trade Name: Ferracore Binder
Dextrins are white, yellow, or brown powders that are partially or fully water-soluble.
Dextrins are used as water-soluble glues in remoistenable envelope adhesives and
paper tubes, in the mining industry as additives in froth flotation, in the foundry
industry as green strength additives in stand casting, as printing thickener for batik
resist dyeing, in paint industry, dye industry, leather industry, used as textile finishing
and coating agent to increase the weight and stiffness of textile fabrics.
SPECIFICATIONS:
| Moisture content Percent by mass, Max | 10.0 |
| Ash content %, max | 0.5 |
| Ph (10% aqueous solution) | 3.0 – 5.0 |
| Cold water soluble %, min | 25.00 - 90.00 |
| Sieve analysis on 20 mesh | 1.0 |
